ROLL-OFF containers are mostly suitable for the collection and transport of general municipal and industrial waste. Suitable for transport and store of loose material too.
The roll-off container according to DIN 30722-1 can be picked up and transported by roll-off tipper vehicles up to 26t with hook mounts (1570 mm system).
Roll-off containers according to DIN 30722 / Part 1 are characterized by the following parameters:
– Support for hook height 1570 mm – Mounting bracket diameter 50 mm in S355 – Container support made of I-beam 180 – Permissible gross container weight 15 t – Optionally with additional rope or chain attachment according to customer requirements
L1
L2
L4
L5
400
4400
2640
1550
4250
4650
2765
1675
4500
4900
2890
1800
4750
5150
3015
1925
5000
5400
3140
2050
5250
5650
3265
2175
5500
5900
3390
2475
5750
6150
3515
2600
6000
6400
3640
2725
6250
6650
3765
2850
6500
6900
3890
2975
6750
7150
4015
3100
7000
7400
4140
3225
Roll-off container according to DIN 30722 part 1
Beginning of stiffening – L5
Container lock – L4
Version: “S” heavy construction
Manufactured according to DIN 30722-1
Base 5 mm and sides 3 mm sheet metal in S235
Hook holder (permanently installed) and container locking according to DIN 30722 / Part 1
Frame spacing 750mm
Bottom / side connection according to customer requirements: (45 ° – beveled approx. 200×200 mm, 90 ° – angular or round construction)
Double wing door with hook lock (top / bottom)2 steel rollers 300 mm wide, 160 mm.
With a greasable axle 40 mm
Container hot-coated on the outside with synthetic resin paint according to customer requirements, at least 80 μm
Version: “L” lightweight construction
Manufactured according to DIN 30722-1
Base 3 mm and sides 3 mm sheet metal in S235
Hook holder (permanently installed) and container locking according to DIN 30722 / Part 1
Frame spacing 750mm
Bottom / side connection according to customer requirements: (45 ° – beveled approx. 200×200 mm, 90 ° – angular or round construction)
Double wing door with hook lock (top / bottom)2 steel rollers 300 mm wide, 160 mm.
With a greasable axle 40 mm
Container hot-coated on the outside with synthetic resin paint according to customer requirements, at least 80 μm
